Video: This is how we manufacture our metallic plate heat exchanger SYNOTHERM

If you are wondering how a metallic plate heat exchanger SYNOTHERM® is produced, you should check our new video.

Our new video shows the entire production process of our plate heat exchanger SYNOTHERM® at our premises in Schwabach.

The metal sheets are cut to the required dimensions by a sheet shear, then a fully automatic spot and edge welding is achieved by a retraceable welding process.

The inlet and outlet consists of piping with the appropriate quality connection technology. As a connection technique, either a flange or a threaded nipple can be welded onto the pipes. This allows us to easily solve your complicated installation situations.

After this the fixing strips and spacers are welded on the heat exchanger. The plate heat exchangers are fixed to the tanks by the fixing strips. The spacers guarantee a defined distance to the tank wall, that the entire heat exchanger surface is immersed and the process liquid is able to flow round the exchanger. This ensures optimum heat transfer.

The pillow structure of the plate heat exchangers is generated by high pressure

forming. The expansion is effected with an inflation pressure, which is far above the working or operating pressure.

The type designation (article number and device number) and technical data are engraved on an identification plate, which is permanently legible.

All plate heat exchangers are designed, manufactured and final-tested in compliance with the Pressure Equipment Directive 2014/68/EU.

Every product hast to perform the overpressure test and the leakage test.

Any questions? Then contact us by e-mail: info@synotherm.de or by phone: +49 9122 / 9855-0.

Comments are closed.